Extreme FTA :: Switches

Switches

Products

Sort by: Product Price Default
3x4 Multi-Switch
3x4 Multi-Switch will let you operate up to 4 Satellite Receivers from the 1 Dish with dual LNB and watch different channels on every receiver at the same time.
Quantity
3x8 Switch
Connect a dual LNB upto 8 receivers with this 3x8 switch. Can be combined with diseqc switches to run multiple satellites.
Quantity
Diseqc 4x1 Switch

Diseqc 4x1 Switch. Connect upto 4 satellites to one receiver.

Quantity
EMP Centauri 22khz

Best quality 22khz switch on the market. The inputs are controlled by the Write N0 “Position” command or by Tone Burst. It allows connection of 2 satellite dishes to one satellite receiver, and is going through for 22 kHz and DiSEqC signals. Comes with weatherproof housing. After installation it is necessary to slide a waterproof sleeves over the connector joints. The sleeves are delivered with the switch.

Quantity
EMP Centauri 4x1 Diseqc

Best quality diseqc switch on the market. Recommended with every receiver. 4 Year Warranty.

Quantity
EMP Centauri 5x4 Multiswitch

5 in 4 out distribution system with passive terrestrial input and with 4 SAT inputs.

Quantity
EMP Centauri 8x1 Diseqc

Best quality 8x1 diseqc switch. 8 in 1 out diseqc switch designed for direct connection of up to 8 SAT IF inputs. 2 year warranty.

Quantity
EMP Centauri 9 x 4 Multi Switch

Hooks upto 4 satellites to 4 FTA receivers. 100% compatible with all FTA receivers. 9 inputs distribution system for up to 4 subscribers with a built-in amplifier for terrestrial input.

Quantity
EMP Centauri 9x8 Multi Switch

Hooks up 4 satellites to 8 FTA receivers. These switches are 100% compatible with all FTA receivers. 2 year warranty.

Quantity
Inline Amp

Get extra signal gain, especially good on long runs of RG6 cable.

Quantity
SW-44 Switch

Pick up both Bell or both Dish Net satellites with the SW-44 and hook upto 4 receivers. Comes with Power Inserter.

Quantity
SW-64 Switch

Hook up 3 satellites to 4 receivers for any Dish Network receivers. Power inserter included.

Quantity
SW21 Switch

SW21 switch for combining 2 satellites on a Dish Network or FTA receiver.

Quantity
SW21X Switch

You can use this switch with an SW21 to receive three satellites feeds into one receiver.

Quantity
SW22khz Switch

22khz switch for reliably switching between 2 LNB's. Compatible with all FTA receivers.

Quantity